We lucked out on the weather, could have been monsoon rain but it
turned out to be very light mist so we had a good crowd of observers.
The SnowWeek guys were great to work with, they are pleased to be
partnered with DTR and the Adirondack sled dealers. They’ll have a full
stock Adirondack Shootout issue in your mailbox in two weeks, including
dyno certification test data. Trail mods to follow in the next issue.
Tomorrow we’re dyno tuning Jarred’s stock F7 from about 10AM to noon or
so, webcams running. Expecting to tune another one into the mid 140’s.
Monday is SkiDoo day, in AM a Bondi trail port 800 twin, then in PM an
830 big bore twin. Tune in to the live streaming audio/ video for all
of that.
Also for new subscribers, to read the SFD (SuperFlowData) files, you
must download free Windyne software at www.superflow.com. I think
it’s easiest if you first open the DTR article, right click on
each SFD file (one at a time) left click “copy” then “paste” each
test on your own computer (I use a 3 1/2 inch floppy for that).
Then open Windyne, go to “file” “open saved test” from your floppy,
then have at it. Remember the data opens up as the OBSERVED HP in the
dyno cell that day, then to see corrected numbers click on “2” above
the test data. Then if you click around, you can operate the software,
do comparison graphs, etc.