As you can see from the schedule we’re coming into the end of the
winter trail sled performance tuning sessions. Les Ferenczy called
today about trying one of the Boondocker DTR programmed boxes on his
stock F7–he’ll be here tomorrow to try that out.
The DTR programming I requested from Boondocker eliminates overlap
fuel, and adds several definite steps, the most important being right
at valve opening (7200 and 6500 depending on year) so we can dial in
correct fuel flow perfectly. It does add fuel or take away fuel as
necessary, and it shows great promise. We dialed in an original
Boondocker on a twin pipe D&D F8, but were unable to smooth out the
declining fuel curve after vave opening, but the DTR Boondocker box
enabled us to make the A/F ratio as flat as we liked from 7200-8400. I
will try to post those results this week.
We’re looking forward to trying the Boondocker box on mod Fusions/ MachZs.
I have in my possession a brand new two cylinder Boss Noss kit that we
need to assess! I’d like someone in WNY to buy this kit (call for
details) and for no extra cost we will baseline dyno tune your sled
here, install the kit on live webcam, then dyno tune with the juice
turned on. The uniqueness of this N2O kit is its self contained
electrical system and most importantly a liquid N2O pressure regulator
that eliminates the need to maintain constant bottle temp/ pressure for
consistant performance.
I will also post this week dyno results of the new D&D F7 Twin
pipes on a bone stock F7; with dyno tweeking would you believe 160+
HP?. I would like to get actual field testing feedback from DTR F7
subscribers who have these twins on their sleds.
I haven’t had my own snowmobile to ride in many years. This fall I
acquired a 97 XLT600 w/ reverse and electric start, 12″ travel just
perfect for an old guy that wants to go out on the lakes just to watch
the dyno tuned stockers and monster sleds go at it. I recently got the
engine bay detailed, carbs rejetted the way I thought they should be,
and of course had to final dyno tune before riding it for the first
time last weekend. After setting the A/F ratio at 12/1 the engine
repeated just over 98 HP over four or five runs within 1/10th of a HP.
So I decided this would be a good candidate to assess the HP potential
of the two cases of Blue Marble Oil provided to me by the manufacturer.
After draining the Polaris oil out of the injection tank and relacing
it with Blue Marble I “treated” the engine by filling each combustion
chamber with Blue Marble oil then gradually rolling the crank to “coat”
cylinder walls/ piston rings/ bottom end with the oil, then let it set
for three days before firing it up. After the three days, I was glad to
have electric start since it took a lot to fire up the oil-soaked XLT
engine.
After I get a few weeks of run time on the sled with Blue Marble,
I will redyno to see if there is HP to be had. In anticipation, I’ve
saved two gallons of the 93 octane gas I used for baseline test, and
that will be used for the final assessment.
I recently dyno tested a Polaris IQ440 and I will post those numbers this week.