SuperFlow Windyne software, SFD files

Dec 26, 2004 | Uncategorized

Sorry about confusing new subscribers with these quick-for-me-to-upload SFD files.

Go to www.superflow.com, click on free windyne software download, then you’re all set to view SFD files on DTR.

Open articles w/ SFD files, click on one SFD file, it opens
automatically as a graph that you can edit as desired. To view numeric
data, X out graph and the graph closes, and is automatically replaced
with OBSERVED NUMERIC DATA FROM THAT RUN. To see corrected data, click
on number 2 box above observed data, and you then see STANDARD
CORRECTED DATA (corrected to 60 degree F dry air, sea level 29.92 in hg
baro).

Then to save this test for later  viewing or  comparing with
other tests, click on FILE. Then  click “save as” and save the SFD
file to your computer with the same numbering as I use. Also under FILE
you can click TEST DESCRIPTION to see what we did/ changed for this
test. Also you can click PREFERENCES and then click CHANNEL ORDER to
see any desired test information (ie: Baro pressure, air temp,
TimeS[seconds of dyno run time], fuel pressure, water temp,etc). BMEP
numbers are available, but won’t be exactly be accurate unless exact
bore/stroke/displacement has been entered prior to test session. I
will try to remember to accurately enter that info into the database
prior to testing so BMEP numbers and Volumetric Efficiency % will be
perfect.

Now open another SFD test file, and if you leave graph open you can
click OVERLAY then click SAVED TESTS below to open and graphically
compare any other tests you’ve saved yourself.

Dyno tuners here can get their own dyno runs downloaded onto a 
3.5″ disc for their own comparison of  DTR posted SFD files.

When I do other testing I will continue to attempt to make time to
include printed test data (from excell files) in the articles.

 

Related Posts